Hey guys! Having issues with your Speed Queen LES17AWF3022 (S7845Y) washing machine? Don't worry, you're not alone! These machines are built to last, but sometimes they can run into a snag. Let's dive into some common problems and how to troubleshoot them, so you can get your laundry routine back on track.

Common Issues and Troubleshooting Steps

When it comes to troubleshooting, it's essential to start with the basics. First, always ensure the machine is properly connected to a power source and that the power outlet is functioning correctly. Check the circuit breaker to see if it has tripped. Next, verify that the water supply valves are fully open. Insufficient water pressure can prevent the machine from filling properly. Also, inspect the drain hose to ensure it's not kinked or clogged, as this can impede water drainage.

1. Machine Won't Start

So, you've loaded your laundry, added the detergent, and pressed the start button, but nothing happens. This is a super common issue, and usually, it's something simple. Here is how to approach this: Start by making sure the machine is properly plugged into a functioning power outlet. It sounds obvious, but sometimes the plug can get loose. Check your home's circuit breaker or fuse box. Look for a tripped breaker or blown fuse that corresponds to the laundry room or the outlet your washer is using. Reset the breaker or replace the fuse, and then try starting the washer again.

The lid switch is a safety feature that prevents the washer from operating when the lid is open. If the lid switch is faulty, the washer won't start even when the lid is closed. Locate the lid switch (usually near the lid hinge) and inspect it for any visible damage. You can test the lid switch using a multimeter to check for continuity. If the switch is broken, you'll need to replace it. If the power cord is damaged, it can prevent the washer from receiving power. Inspect the entire length of the cord for any cuts, fraying, or other damage. If you find any damage, replace the power cord immediately.

2. Machine Won't Fill with Water

If your Speed Queen is starting, but the drum isn't filling with water, that's another issue we can tackle. Start by checking the water inlet valves. These valves control the flow of hot and cold water into the machine. Make sure both valves are fully open. Inspect the water inlet hoses for any kinks, clogs, or damage. Straighten any kinks and clear any obstructions. Remove the hoses from the back of the washer and check the inlet screens for sediment or debris. Clean the screens thoroughly and reattach the hoses.

Water inlet valves can fail over time, preventing water from entering the machine. Use a multimeter to test the solenoid coils on the water inlet valves for continuity. If there's no continuity, the valve needs to be replaced. The water level pressure switch monitors the water level inside the tub. If this switch is faulty, it may not allow the washer to fill properly. Locate the pressure switch and inspect the hose connected to it for any clogs or damage. You can also test the switch using a multimeter to check for continuity at different water levels. If the switch is defective, replace it.

3. Machine Won't Drain

A washing machine that refuses to drain can leave you with a tub full of water and wet clothes. Not ideal, right? The drain hose is the first place to look when your washer won't drain. Make sure it's not kinked, clogged, or damaged. Straighten any kinks and clear any obstructions. Disconnect the hose from the drainpipe and check for any blockages. Use a garden hose to flush out any debris. Ensure the drain hose is properly connected to the drainpipe and that it's not inserted too far, which can cause siphoning issues.

The drain pump is responsible for pumping water out of the washer. If the drain pump is clogged or faulty, it won't be able to drain the water. Locate the drain pump (usually at the bottom of the washer) and inspect it for any obstructions. Remove any debris, such as lint, hair, or small objects. Use a multimeter to test the drain pump motor for continuity. If the motor is not working, replace the drain pump. A blocked drain filter can prevent water from draining properly. Locate the drain filter (usually near the drain pump) and clean it thoroughly. Remove any lint, debris, or sediment that may be blocking the filter.

4. Machine is Leaking

Discovering a leak can be alarming, but addressing it quickly can prevent further damage. Inspect the water inlet hoses for any cracks, leaks, or loose connections. Tighten the connections and replace the hoses if necessary. The drain hose should be securely connected to the washer and the drainpipe. Check for any leaks or loose connections. Tighten the connections and replace the hose if needed. The tub seal prevents water from leaking out of the tub. If the seal is damaged or worn, it can cause leaks. Inspect the tub seal and replace it if necessary.

If the water inlet valve is leaking, it can cause water to drip from the back of the washer. Inspect the valve for any cracks or leaks. Replace the valve if needed. The drain pump can also leak if it's damaged or worn. Inspect the pump for any leaks and replace it if necessary. Over time, the hose connections can become loose or corroded, leading to leaks. Inspect all hose connections and tighten them as needed. Replace any corroded or damaged connections.

5. Machine is Noisy

Unusual noises can indicate underlying issues that need attention. Start by making sure the washer is level. An unbalanced machine can vibrate and make excessive noise. Use a level to check the washer's position and adjust the leveling feet as needed. Worn or damaged drum bearings can cause a rumbling or grinding noise during operation. If you suspect the bearings are the problem, you'll need to replace them. This is a more complex repair that may require professional assistance.

Inspect the drive belt for wear or damage. A worn belt can slip and cause a squealing noise. Replace the belt if necessary. The motor coupling connects the motor to the transmission. If the coupling is damaged, it can cause a loud banging noise. Inspect the motor coupling and replace it if needed. Loose or worn suspension rods can cause the washer to vibrate excessively and make noise. Inspect the suspension rods and replace them if necessary.

Safety First!

Before you start any repairs, always disconnect the power to your washing machine. This prevents any accidental shocks or injuries. Also, turn off the water supply to the machine to avoid any water damage. If you're not comfortable doing any of these repairs yourself, it's always best to call a qualified appliance repair technician. They have the experience and tools to diagnose and fix the problem safely and efficiently.

When to Call a Professional

While many issues can be resolved with some basic troubleshooting, certain situations warrant professional help. If you're not comfortable working with electrical components, dealing with water connections, or handling complex repairs, it's best to call a technician. Additionally, if you've tried several troubleshooting steps and the problem persists, it's a sign that the issue may be beyond your expertise. A qualified technician can accurately diagnose the problem and perform the necessary repairs to get your Speed Queen LES17AWF3022 (S7845Y) back in working order. They can also provide valuable insights into preventing future issues and maintaining your appliance for long-term performance.

Final Thoughts

Troubleshooting your Speed Queen LES17AWF3022 (S7845Y) washing machine doesn't have to be a headache. By following these steps, you can often identify and fix common problems yourself. Remember to always prioritize safety and don't hesitate to call a professional if you're unsure about anything. With a little patience and effort, you can keep your Speed Queen running smoothly for years to come! Good luck, and happy laundering!